The Vandy Vape Requiem BF Kit is a new Squonk kit which definitely has a “high end” look about it!
Previous Vandy Vape squonk kits include the Pulse, Pulse X, Pulse 2 and Simple EX.
What To Expect From The Vandy Vape Requiem BF Kit?
The kit consists of the Requiem BF (Bottom Feed) mod and the BF Requiem RDA.
There isn’t much info on the actual RDA but it is different from the original Requiem RDA not only in appearance…
The original Requiem had 3 different top caps which altered how the incoming airflow could be adjusted. The BF version does come with 2 different top caps but I am not sure if these are only different in appearance or do they offer different airflow intakes? 
Also no mention if the airflow is adjustable – it does look like it should be?
The deck is for a single coil setup with 2 clamp screws.
The mod is a full mechanical mod – basically there is no chip to regulate the output or provide safety functions so you will need to know all about Ohms Law and Battery Safety to enjoy using this mod.
Vandy Vape say that they use “Silver Contact and Different Alloys for maximum conductivity” – hmm not very specific. A mod can lose power from adding too many items into the circuit which increase resistance – so manufacturers tend to keep the internals very minimalistic.
It is quite confusing the two different resistance levels stated in the image below – but it is just illustrating how they have tried to reduce any unnecessary resistance from the circuit.
The kit uses a single 18650 battery which is not supplied. As this is a mech mod there is no USB port – you remove the battery to charge in a suitable charger.
As this is a squonk mod there is a 6ml squonk bottle inside (also a spare is included in the kit) and the bottle has 3 refill methods – you can even refill with the bottle installed. So this should mean a lot less mess instead of having to remove the bottle to fill.
A lock system is included to prevent accidental firing. Also the 510 connector can be adjusted by turning the retaining collar underneath.
The side panel is removable and another marketing feature is that you can mix and match components and customise the mod, squonk bottle and RDA.
There are 4 colours to choose from: Ghost Samurai, Shadow King, Craftsman Silver and Craftsman Brass.
Kit Includes
- Vandy Vape Requiem BF mod
- Vandy Vape Requiem RDA
- 2x Squonk bottle
- Spare parts bag
- Air hood
- PC drip tip
- Beauty ring
- 5x plastic battery cover (battery wraps I think?)
- 2x Fused Clapton 0.26ohm coil
- Instruction manual
Vandy Vape Requiem Mechanical BF Mod Specs
- Size: 72.5x24x42mm
- Battery: 1×18650 (not included)
- Squonk bottle capacity: 6ml
- Refill squonk bottle in situ
- Output: Full battery power
- Silver copper alloy contacts – internal resistance: 0.00128ohm / less than 0.005ohm
- Fire button lock switch
- 3 bottle refill methods
- Different customisation options available
- Adjustable 510 connection
Vandy Vape Requiem RDA Specs
- Size: 22×21.5mm (24mm beauty ring also included)
- Capacity: 1ml
- Single coil deck
- Adjustable airflow
Sadly the details on the actual RDA (airflow especially) are a bit vague but I do think this kit looks stunning with those side panels!
Let me know what you think of the Vandy Vape Requiem BF Kit in the comments below!
Umm. I think this “review” is missing the most important parts that makes it a review. How does it perform? does it hit hard? What issues/problems you faced? etc etc…
Hiya this is not a review – it is a “Preview” – i.e. showing upcoming new vape gear – have a look in the title.
So far we have reviewed the RDA on it’s own you can see that here https://www.ecigclick.co.uk/vandy-vape-requiem-rda-review/
At present we have not had the full kit for review.