The Uwell Caliburn Explorer is a new pod kit addition to the popular Caliburn range.
There are too many models now of the Caliburn range to mention but recent kits include the Caliburn G3, AZ3, GZ2 and A3S.
What To Expect From The Uwell Caliburn Explorer…
The first thing you might spot is the cross shaped fire button – there is a good reason for this…
Basically this has 2 coils. Each side of the pod is a section of its own with its own e-liquid tank and its own coil.
Therefore you can select which coil you want to use. If you have coils of different resistances it means you can switch between the two, or you can even combine or alternate!
Pressing the “up” bit of the cross button activates dual coil mode. This also means the contents of both tanks will be output together – so a mixture of both flavours. Plus this will give maximum vapour output!
You can use the left and right buttons to select from the left coil or right coil and the flavours in their tank.
Or if you press the down button it will alternate between both coils and flavours.
The coil resistances will of course affect the output. The device will select the appropriate output for each coil in use.
In theory when you combine them the resistance will half meaning two 0.8ohm coils will be 0.4ohm in total if used in dual coil mode. Therefore the device will output the maximum of 32W.
When it comes to coils this gets even better! This is compatible with the Caliburn G and G2 coils so plenty of compatibility and choice. You get 2 each of the 0.8ohm and 1.2ohm coils in the kit.
Inside the device is a 1000mAh battery and 2A fast charging USB Type C port. LED indicators inform of device, battery and coil selection status.
In standard format the pod will hold 4ml of e-liquid – that is 2ml in each side of the pod. However for us poor souls with TPD regulations this is reduced to 2ml in total – 1ml in each side.
A side fill port is provided for each compartment of the pod.
You get 2 airflow options – to change you remove the pod and rotate it 180° to align the opposite airflow inlet.
There are 4 colours to choose from: Black, Silver, Pink & Cyan and Orange & Black.
Kit Includes
- Uwell Caliburn Explorer device
- Explorer empty pod
- 2x 0.8ohm Meshed Caliburn G coil
- 2x 1.2ohm Meshed Caliburn G2 coil
- USB Type C cable
- User manual
Uwell Caliburn Explorer Specs
- Size: 128.1x26x14.6mm
- Battery: 1000mAh (internal)
- Display: LED indicators
- Output: 32W max
- Modes: Combine, alternate or use each of the dual coils to change resistance
- Type C USB charging – 2A charge rate
- Resistance range: Not specified
- Capacity: 4ml (2ml for each cartridge section – standard) / 2ml (1ml for each cartridge section – TPD)
- Coils: Caliburn G and G2 coil range
- Auto draw
- 2 airflow settings
- Pro-FOCS flavour technology
In theory this sounds very clever! A similar system was employed on the Crown M kit with a coil with two resistance options which our Neil C found to work well!
Just imagine all the resistance and flavour combinations which could be at your fingertips!
Let me know what you think of the Uwell Caliburn Explorer in the comments below!
