The Steam Crave Hadron Pro DNA250C Mod is a new release from a brand who likes to provide “over the top” vape gear!
By “over the top” I am referring to the monsters which are the Titan 28ml RDTA and the 4×18650 Titan box mod!
What To Expect From The Steam Crave Hadron Pro DNA250C Mod?
As you can expect this continues in the same vein as the rest of Steam Craves previous releases in being a bit of a beast.
For a start the maximum output is 400W or 16.8V – and you have various user modes such as Variable Wattage and Temperature control to play with.
The brain of the device is the much loved DNA250C chipset from Evolv which can be customised and upgraded using the Escribe tool and USB port.
Of course with a DNA board you also get the popular Replay feature and a wattage boost mode.
Sadly the type of USB port is not specified but you can charge the device, update / modify the software and also use it as a “on the go” USB power bank.
When it comes to the battery this all gets a bit complicated. This has an internal LiPO battery pack which is made by Fullymax and has a rating of 1600mAh.
However the battery is a 4S type which seems to mean there are 4 batteries bundled together in the pack.
Not knowing all the details about battery packs I am not sure if the 4 batteries each have 1600mAh or if it is a combined rating. I have tried to Google this but it is a lot more complicated and hard to compare these to standard vape batteries for capacity – so I won’t pretend I know what I am talking about here!
A full colour TFT screen is provided to view your vaping data but the size is not specified.
There are 3 colour options to choose from: Gunmetal, Silver and Black.
Kit Includes
- Steam Crave Hadron Pro DNA250C Mod
- USB Connecting cable
- User manual
A “Combo Box” kit is also available which includes…
- Steam Crave Hadron Pro DNA250C Mod
- USB Connecting cable
- User manual
- Aromamizer Ragnar RDTA (including Postless deck)
- Ragnar series deck
- Chamber reducer
- Spare parts bag
- 18ml Glass
- 25ml conversion chimney
- 2x 25ml glass
- Coil cotton
- Vape band
- Allen key
- User manual
Steam Crave Hadron Pro DNA250C Mod Specs
- Size: 59×36.6×116.1mm
- Output: 1-400W / 0.2-16.8V
- User modes: VW, Replay, Boost, TC (Ni, Ti, SS460, SS316)
- Battery: 1600mAh 4S Fullymax LiPO battery pack
- Display: Full colour TFT screen
- Resistance range: 0.1-3ohm
- Maximum 3A charge rate (2A recommended)
- Temperature control limits: 200-600°F
- DNA250C chipset
- Firmware Upgradeable
- Pass through charging
- On-the-go USB power bank
Yeh it’s a flipping monster, obviously I don’t think many will be exploiting the full 400W potential but the DNA250C chipset should make this very popular.
Let me know what you think of the Steam Crave Hadron Pro DNA250C Mod in the comments below!
