The Smoant Pasito II Pod Kit is the update to the original Pasito kit.

Smoant Pasito II banner

I reviewed the original Pasito and found it to be a lovely kit – so how have Smoant updated it?

What Is New On The Smoant Pasito II Pod Kit?

The Pasito 2 has had a lot of updates and it is now a real grown up pod kit full of features.Smoant Pasito II components

Looking first at the device itself – this has an internal 2500mAh battery which is charged via the USB Type C port at a fast 2A rate.Smoant Pasito II battery

The output is higher too at 1-80W and you can choose from Variable Wattage, DVW (I assume “Dynamic” Variable Wattage?), Bypass, Temperature Control and TCR.

A 0.96in colour TFT screen is located on the side and the screen colour themes can be changed.Smoant Pasito II screen

The pod has changed too and now is compatible with 7 different coil types.pasito 2 coil options

Firstly the K range of coils which were found on the Smoant Knight 80 kit plus some new coils too:

  • K3 – 0.6ohm Mesh
  • K2 – 0.4ohm Dual Mesh
  • K-RBA – DIY RBA coil
  • K1 – 0.3ohm Mesh

Plus if you purchase the optional Pasito 2 adaptor you can use the coils from the original Pasito which include the 1.4ohm Ni80, 0.6ohm Mesh and the Pasito RBA.

The pod capacity has now increased to 6ml however this is still only going to be 2ml in TPD regulated areas.Smoant Pasito II pod

You can also purchase a 510 adaptor to allow any 510 atomiser to be used on the device – basically turning it into a box mod.pasito 2 510

An airflow adjustment lever is located on the top of the pod.pasito 2 airflow

There are 4 colours to choose from: Carbon Fibre, Chocolate, Diamond Shaped and Indigo.

pasito II colours

Kit Includes

  • Smoant Pasito II device
  • Pod
  • K-1 0.3ohm mesh coil (installed)
  • K3 0.6ohm mesh coil
  • Type C USB cable
  • User manual

pasito 2 contents

Smoant Pasito II Kit Specs

  • Size: 117x38x27mm
  • Output: 1-80W
  • User modes: VW, DVW, Bypass, TC (Ni, Ti, SS316), TCR
  • Battery: 2500mAh (internal)
  • Display: 0.96in colour TFT screen
  • E-liquid capacity: 6ml (Standard) / 2ml (TPD)
  • Pods: Refillable, replaceable coil
  • Coil options: Compatible with Smoant Knight coil range and Original Pasito coils (adaptor available separately) – RBA available in both coil ranges
  • Adjustable airflow
  • Side fill port
  • 510 adaptor available separately to use device as a box mod
  • Type C USB – 2A charge rate

pasito 2 specsI love the look of this kit – even more features and lots of coil options too including 2 types of RBA!

Will you be purchasing the Smoant Pasito II Pod Kit? Let me know in the comments below!

Shell Ecigclick Photo
Michelle Jones

I am an engineer and Technical Author by trade. My journey in vaping began around 2016, in the days of Tornado tanks, Ego batteries and Variable Voltage. It took me a few years to fully quit smoking but I finally stopped in June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod and Bubblegum e-liquid! I have reported on the latest news on Ecigclick since 2017 and love being part of this great team! My passion for Tobacco Harm Reduction has also led me to becoming a Trustee for the NNA (New Nicotine Alliance) aiding in Advocacy

I am an engineer and Technical Author by trade. My journey in vaping began around 2016, in the days of Tornado tanks, Ego batteries and Variable Voltage. It took me a few years to fully quit smoking but I finally stopped in June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod and Bubblegum e-liquid! I have reported on the latest news on Ecigclick since 2017 and love being part of this great team! My passion for Tobacco Harm Reduction has also led me to becoming a Trustee for the NNA (New Nicotine Alliance) aiding in Advocacy

1 COMMENT

LEAVE A REPLY

Please enter your comment!
Please enter your name here