The Oumier Wasp Nano RTA V2 is the update to the original Wasp Nano RTA.
The Wasp range have been very popular – the original Wasp Nano RDA was a teeny little flavour chucker which was followed by the Wasp Nano RDTA, Wasp Nano Squonk Kit and the Wasp Nano MTL RTA.
What Is New About The Oumier Wasp Nano RTA V2?
I will mainly look at what is new for the V2 compared to the original.
For a start the diameter has increased from 23mm to 24mm which should give a bit more room on the single coil build deck.
The original deck had only 2 clamps, whereas the V2 has 4 clamps so it can accommodate clockwise or anti-clockwise wound coils.
The capacity with the straight glass is the same at 2ml but there is also a bubble glass to take this up to 3.8ml.
Another noticeable change is the drip tip – this was originally part of the top cap – but on the V2 this is a standard 810 fitment and is replaceable.
As with the original the airflow is on the tank base and is adjustable with 3 airflow inlets.
Filling is taken care of by removing the screw off top cap to access the fill ports.
There are plenty of supplies in the kit to get you up and running quickly with 2x 0.28ohm Fused coils and even the cotton to wick it with!
There are 4 colours to choose from: Stainless Steel, Black, Rainbow and Gold.
Kit Includes
- Oumier Wasp Nano RTA V2
- Spare Silicone rings
- 2x 0.28ohm Fused Coils
- 2x Screws
- Screwdriver
- Cotton
- Spare Glass
- User manual
Oumier Wasp Nano RTA V2 Specs
- Size: 24×40.5mm
- Capacity: 3.8ml (Bubble glass) / 2ml straight glass (TPD)
- Single coil build deck
- Bottom adjustable airflow
- Deck designed for clockwise / anti-clockwise wound coil
- Top fill
This has had quite a few improvements – so I hope it is the real deal and not just a “Wanna-bee”… Sorry…
Anyway let me know if you are buzzing about this one in the comments bee-low… Again I can only apologise…